Machine Calibration
Machine Operation
Set and hold instrument accuracy against a known reference, and act when it drifts.
Resolved from 3 source names · All departments
What the missing 34% is made of
72% heldMachine Calibration is made of 5 components. 2 of them are not yet evidenced, which is what the shortfall actually is.
Instrument zeroing
HeldEvidence: Partner assessment
Reference standard use
HeldEvidence: Skill check
Calibration interval control
HeldEvidence: Document requirement
Drift detection
Partly heldEvidence: Operational signal
Out of tolerance escalation
MissingEvidence: No evidence yet
One document covers several skills or components?
Upload it once and link it to all 3 Line setup and changeover skills. It goes to Review and validation, then counts as evidence for each linked skill.
Components & evidence
5 components. Uploaded evidence needs verification before it can ground training.
1. Instrument zeroing
24% of skill · Assessment: Partner assessment
2. Reference standard use
22% of skill · Assessment: Skill check
3. Calibration interval control
20% of skill · Assessment: Document requirement
4. Drift detection
18% of skill · Assessment: Operational signal
5. Out of tolerance escalation
16% of skill · Not assessed
Other or formerly linked skill sources remain in the Knowledge Base; removed components do not count as current component evidence.
Knowledge actions
Evidence and requests associated with this skill.
No knowledge actions yet.
Where this skill comes from
Calibration Competency
Partner platform
Instrument Calibration
Partner platform
Calibration control
Company document